If someone knows how to install "DIS_Install"
(It's the operating system OPENSERVER from SCO)
and "DIS Program",please leave some instructions
in this file.
THANK YOU
----------------------------------------------------
At least a 1,2GB Harddisk is needed ,
it will be formatted during install!!!
download oss478a.Z(ide/atapi driver) from
ftp.sco.com , unpack with gunzip for windows.
and create disk with Rawwritewin.
download BMW_Dis19_Bootdisks.rar create
Root and Boot floppy with Rawwritewin.
1.you have to specify how your cd-rom
is connected to your pc.
boot from floppy 'Boot', type at boot:
defbootstr Srom=wd(x,0,y,0) ;x 0=primary 1=secondary / y 0=master 1=slave
when booting is done type:
mkdir /src /dst
mount -r /dev/fd0135ds18 /mnt
cd /dev
cpio -idmuv -I/mnt/u-dev
cd /
umount /mnt
loadram
2.Kernel has no ide support so you need to add it.
insert oss478a disk and reboot, type at boot:
defbootstr btld=fd(60) hd=wd link=wd
follow instructions ...
enter maintenance mode with enter key (Root password:SUONLY)
type:
mount -r /dev/fd0135ds18 /mnt
btldinstall /mnt
answer: wd , yes , yes
umount /mnt
2b.add your cd-rom to configuration &
remove the DIS default SCSI cd-rom's.
type:
mkdev cdrom
choose remove cd-rom
answer: eiad, 0, 0, 3, 0 , yes , no
choose remove cd-rom
answer: eiad , 0 , 0 , 4 , 0 , yes , no
choose add cd-rom
answer: yes, wd , (x) , 0 , (y), 0 , yes , yes , no ;(x) 0=pri. 1=sec. / (y) 0=master 1=slave
q quit ->y,y,y
2c.change startupconfig so you can
enter maintenace mode easier.
type:
scoadmin ;->system->system startup manager. uncheck 'immediately go to multi-...'
reboot
3.add vga card (ati mach64 in this example)
you need a resulution of 1024x768
with 256colors or DiS wont start!
enter maintenance mode
cd /usr/lib/grafinfo
ls -C ;you see folders like ati , hercules , ibm ...
cd ati ;pick your card vendor (ati in this case)
ls ;you see a list of supported ati-chips ...
vi m64.xgi ;scroll down ,look for a line ati.mach64.gx.1024x768-256-75
;write it down and exit with Q quit
cd ..
vi grafdev ;edit vga config change first line to
;/dev/console:ati.mach64.gx.1024x768-256-75
;use key 'x' to delete and key 'a' to insert text
;exit&save with Q write! quit
mv /usr/prisma /usr/p-risma ;rename DIS driver or startx fails
mv /comtrol /c-omtrol ;rename another DIS driver
startx ;can exit with alt-print
;if startx runs without errors,change vga config for
vi grafdev ;dev/tty0-12: like you did /dev/console: before
4.change mouse (ps/2 mouse)
mkdev mouse
choose remove mouse
choose add mouse
choose ps/2 keyboard mouse
choose low resulution keyboard mouse
choose multiscreen
when asked to assign to other terminals answer no
relink kernel y->y->y
reboot
5.prepare to start dis
enter maintenace mode
scoadmin ;->account manager -> remove/change password for user 'DIS'
;->system->system startup manager. check 'immediately go to multi-...'
6.Start DIS
reboot
go into multi user mode , just do nothing ;)
log in as user 'dis'
startx
now you can install Dis programme V19
your system is up and ready to do ... nothing
Tips:
when startting dis for the first time it asked for 'hndler nr.' enter
whatever you want , just write it down it will be needed for installing
dis programms !
there are some newer vga drivers on ftp://ftp.sco.com/pub/openserver5/drivers/OSR500-OSR502
to install these newer drivers you need AHS5.2 which you prolly cant get.If your lucky
you might d/l vidconf.tar (only the vidconf part of AHS5.2)
you can download Skunkware2000.iso with contains many programms like midnight commander.
rgds M3
|
 讓我們程式搜尋結果更加完美 如果您覺得該文件有幫助到您，煩請按下我如果您覺得該文件是一個一無是處的文件，也煩請按下我 |
|
該文件您看起來是亂碼嗎？您可以切換編碼方式試試看！ISO-8859-1 | latin1 | euc-kr | euc-jp | CP936 | CP950 | UTF-8 | GB2312 | BIG5 |
|