A few notes on the upgrade, but first a reminder that there are risks to doing the upgrade on your own, so do so knowing that risk is present. Although rare, problems can occur if update steps arent followed properly or there are issues with the media. Such conditions can cause problems with the nav drive which may not be recoverable.
- The image files have been rard (compressed), so you will first need to un-rar them. I use a program called WinRAR.
- Once you have uncompressed the image files you will need to burn them to a CD-R using a program called Alcohol 120%, which is available as a free 30 day trial here - http://trial.alcohol-soft.com/en/download_120.php
- Burn the disk using a high quality CD-R disk at the lowest possible burning speed using these steps:
1. click on image burning wizard then click browse and find the folder that you extracted the two files to.
2. click on bmw v27? (theres only one to choose) and click open it.
3. Under Image file information, it should list the two files. Click Next
4. If you didnt insert a high quality CD-R earlier, insert it and set the write speed at the slowest one (mine was 4x). Make sure the CD/DVD Recorder is set on the right drive.
5. Click Start and it should start burning. Once it reaches 100%, itll be done and the disc will eject on its own.
- Once the disk is ready, follow these steps
1. Go to your vehicle and turn the ignition switch to the first position. Let the navigation system boot up and get into a normal operating mode.
2. Leaving the system on (never turn the power off during these steps!!), go back and eject the navigation CD from your drive unit.
3. Put in the V27 disk you created into your drive unit. Watch your screen and be patient. It says it will take about 6 minutes to do the upgrade, but it doesnt take that long. When its done it will eject the CD automatically.
4. Put your navigation CD back in the drive and make sure everything is working properly.
To activate the Perspective view mode with V27 you need to do the following (thanks to 2Wires for this info):
Go to the main menu and then settings. Press the menu button for about 10 seconds until a new menu appears.
Check Perspective. Voil. Perspective mode is now available.
Special Thanks to http://mdsbrain.com/mini/?p=127
|
 讓我們程式搜尋結果更加完美 如果您覺得該文件有幫助到您，煩請按下我如果您覺得該文件是一個一無是處的文件，也煩請按下我 |
|
該文件您看起來是亂碼嗎？您可以切換編碼方式試試看！ISO-8859-1 | latin1 | euc-kr | euc-jp | CP936 | CP950 | UTF-8 | GB2312 | BIG5 |
|