Installation of Cadence IC 5.0.33 under Linux Mandrake 9.2 DVD PowerPack using KDE interface.
Document written by The Dock, 8 March 2004, for educational purposes only.
Feedbqck posible to: thedock@netcourrier.com
***************************************************************
* I am not responsible of the use you will make of this file. *
* Do not copy copyrighted material since it is illegal. *
***************************************************************
Note 1: All the path specified in this documents are ALWAYS full paths.
Note 2: The following line means: type "ls -" without the "" on the prompt:
> ls -la
Note 3: The folder "thedock" will design your actual loggin name (i.e. your home folder)
Nota 4: The graphical environement used was KDE, and the shell was original bash.
1. Installation of Cadence IC 5.0.33 (Virtuoso/Spectre/Dracula)
---------------------------------------------------------------
-Start a console (Konsole under KDE)
-Logging as root:
> su -
Password:> (enter the root password here)
-Create the InstallCadence directory in your personal home directory:
> mkdir /home/thedock/CadenceInstall/
-Copy all the content of the Cadence DVD to the following directory: /home/thedock/CadenceInstall/
> cp -r /mnt/cdrom/* /home/thedock/CadenceInstall/
Note: you can also use you favorite file manager under KDE to make these two previous steps.
Note: this step is necessary because the Cadence installation program is extremely sensitive to read errors on the CDROM for example.
-From now on, you will have the following directories:
/home/thedock/CadenceInstall/Cadence_Aptivia33_lnx86/
/home/thedock/CadenceInstall/Cadence_Virtuoso_IC5033_lnx86/
/home/thedock/CadenceInstall/Hacker/
/home/thedock/CadenceInstall/InstallCadence_extrafiles/
-Delete the previous Cadence folder if it exists:
> rm -fr /Cadence
-Go into the following directory: /home/thedock/CadenceInstall/Cadence_Virtuoso_IC5033_lnx86/ISR200312121550/CDROM1/
> cd /home/thedock/CadenceInstall/Cadence_Virtuoso_IC5033_lnx86/ISR200312121550/CDROM1/
-Execute the installation script from this directory (be carefull with the capitals):
> sh SETUP.SH
-Specify path of install directory [OR type [RETURN] to exit]:
> /Cadence
-Directory /Cadence does not exist. Create? [y/n]:
> y
-Do you want to start softload? [y/n]:
> y
-Warning: Software administration should not be done as root because it could cause file permissions problems while extracting software Press [Return] to proceed, q to quit :
> (just press RETURN to accept to continue)
-The available options are:
> 1 (Load Available Products)
-You must now identify where the CD-ROM is mounted:
> 1 (Local (mounted to this machine))
-Specify the CD-ROM mount point:
> 2 (Other)
-Type the CD-ROM mount point: [ /home/thedock/CadenceInstall/Cadence_Virtuoso_IC5033_lnx86/ISR200312121550/CDROM1 ]
> (just press RETURN to accept to continue: the path should be correct at this point)
-Do you want to view the README file? Please press y (yes) or n (no) :
> y
-Follow the standard Cadence installation instructions. Press [Return] to proceed, q to quit :
> (just press RETURN to accept to continue)
-Where is the installation information?
> 4 (Cadence Catalog)
-311:Unknown Product Name Removed from QSR. Press [RETURN] to continue:
> (just press RETURN to accept to continue)
-Go to the end of the products list by pressing the SPACE BAR
-Type your choice (a,n,p,1-3,2 5 9 ...):
> a (All of the above)
-Go to the end of the list of the selected products by pressing the SPACE BAR
-Are your selections correct? [y/n]
> y
-Disk checks successful. The following products will be installed or updated. Just press SPACE BAR to continue.
-The following media is required:
IC5033 lnx86 P/N 356-70352-0301 CDROM # 1
IC5033 lnx86 P/N 356-70352-0302 CDROM # 2
IC5033 lnx86 P/N 356-70352-0303 CDROM # 3
IC5033 lnx86 ISR 200312121550 CDROM # 1
Press [Return] to proceed, q to quit :
> (just press RETURN to accept to continue)
-Wait until the next CDROM is asked for (~7 minutes)
-Your package selections require IC5033 lnx86 P/N 356-70352-0301 CDROM # 1.
> 4 (Change CD-ROM mount point.)
-You must now identify where the CD-ROM is mounted.
> 1 (Local (mounted to this machine))
-Specify the CD-ROM mount point
> 2 (Other)
-Type the CD-ROM mount point: [ /home/thedock/CadenceInstall/Cadence_Virtuoso_IC5033_lnx86/ISR200312121550/CDROM1 ]
> /home/thedock/CadenceInstall/Cadence_Virtuoso_IC5033_lnx86/Base/CDROM1
-CDROM # 2 and CDROM # 3 will be loaded automaticaly. There is nothing to do, just wait.
-Verify your installation. The available options are:
> 2 (List Installed Products)
-Specify the operating system of the products:
> 3 (lnx86)
-Now you can quit the Cadence IC 5.0.33 installation and begin the Aptivia installation. The available options are:
> q (Quit)
2. Installation of Cadence Aptivia
----------------------------------
-Before you try to install Cadence Aptivia, you must have installed all the Cadence IC 5.0.33 products.
-Go to the following directory: /home/thedock/CadenceInstall/Cadence_Aptivia33_lnx86/Base/CDROM1/
> cd /home/thedock/CadenceInstall/Cadence_Aptivia33_lnx86/Base/CDROM1/
-Make sure you are also logged in as root:
> su -
Password:> (enter the root password here)
-Execute the installation script from this directory (be carefull with the capitals):
> sh SETUP.SH
-Specify path of install directory [OR type [RETURN] to exit]:
> /Cadence/Aptivia
-Directory /Cadence/Aptivia does not exist. Create? [y/n]:
> y
-Do you want to start softload? [y/n]:
> y
-Warning: Software administration should not be done as root because it could cause file permissions problems while extracting software Press [Return] to proceed, q to quit :
> (just press RETURN to accept to continue)
-The available options are:
> 1 (Load Available Products)
-You must now identify where the CD-ROM is mounted.
> 1 (Local (mounted to this machine))
-Specify the CD-ROM mount point
> 2 (Other)
-Type the CD-ROM mount point: [ /home/thedock/CadenceInstall/Cadence_Aptivia33_lnx86/Base/CDROM1 ]
> (just press RETURN to accept to continue: the path should be correct at this point)
-Do you want to view the README file? Please press y (yes) or n (no) :
> y
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aptivia 3.3 (for use with IC 5.0.33, IC 5.0.32, or IC 4.4.6 MSR 11 or later)
The following environment variable must be set to the installed location
of the Aptivia software:
setenv ACV_ROOT /tools/acv
where is the directory where the Aptivia software was installed.
The Aptivia bin directory must be appended to the path variable as follows:
set path=( $path $ACV_ROOT/bin)
Documentation is available on SourceLink. HTML versions of the manuals are
additionally installed in the following locations:
Aptivia User's Guide $ACV_ROOT/docs/acvug
Aptivia Reference Manual $ACV_ROOT/docs/acvrm
Aptivia Optimization User's
Guide $ACV_ROOT/docs/optug
DCM User's Guide $ACV_ROOT/docs/dcmug
MATLAB Measures User's Guide $ACV_ROOT/docs/matlabmeasug
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-Press [Return] to proceed, q to quit :
> (just press RETURN to accept to continue)
-Where is the installation information?
> 4 (Cadence Catalog)
-Type your choice (a,n,p,1-3,2 5 9 ...):
> a (All of the above)
-Are your selections correct? [y/n]
> y
-The following media is required:
VSDE33 lnx86 P/N 356-73091-0301 CDROM # 1
Press [Return] to proceed, q to quit :
> (just press RETURN to accept to continue)
-Verify your installation. The available options are:
> 2 (List Installed Products)
-Specify the operating system of the products:
> 3 (lnx86)
-Now you can quit the Cadence Aptivia installation and begin the Hacker Script installation. The available options are:
> q (Quit)
3. Installation of the Hacker Script
------------------------------------
-When the installations of Cadence IC 5.0.33 and Aptivia was successfull, you can enter the Hacker Script installation.
-Make sure you are also logged in as root:
> su -
Password:> (enter the root password here)
-Copy the Hacker Script and data file to the following directory /Cadence/:
> cp /home/thedock/CadenceInstall/Hacker/* /Cadence/
-Go into the following directory /Cadence/
> cd /Cadence/
-Build q symbolic link to the Cadence files (au lieu d'un lien direct):
> ln -s tools.lnx86 tools
> ln -s /Cadence/Aptivia/tools.lnx86 /Cadence/Aptivia/tools
-Run the Hacker Script:
> ./hacker hacker.script > /dev/tty (be carefull: the second ">" in this line is not a prompt: it is the mathematical symbol)
-Normally, a few errors should occur (5~6), but a lot of files should be scanned and some of their will be modified.
4. Installing Netscape 7.1 for Cadence Documentation viewing
------------------------------------------------------------
-Since I found no solution to use Mozilla for documentation viewing in Cadence, here is the description how to install and configure Netscape for using it to view the Cadence Docimentation
-Open a Console (Konsole)
-Make sure you are also logged in as root:
> su -
Password:> (enter the root password here)
-Goto the following directory /home/thedock/CadenceInstall/Netscape
> cd /home/thedock/CadenceInstall/Netscape/
-Execute the installation script
> ./netscape-installer
-A new window will pop-up: click "Next"
-Continue by clicking "Accept"
-Select "Full" but let the default installation directory (/usr/local/netscape)
-Click "Next" to continue
-Click "Install" to make the Netscape installation
-Click "OK" when installation has completed: now Netscape is installed into /usr/local/netscape/
5. Configuration of the Environement Variables
----------------------------------------------
-After you applied the Hacker Script successfully, you must configure the environement variables
-Now goto your following directory: /home/thedock/
-Edit the .bashrc file: /home/thedock/.bashrc (for bash users only, the others will not be described, but take a look at the end if you are using ksh or compatible)
-Add the environement that follows:
export ACV_ROOT="/Cadence/Aptivia/tools/acv"
export LANG C
PATH=$PATH:/usr/local/netscape:/Cadence:/Cadence/tools:/Cadence/tools/dfII:/Cadence/tools/dfII/bin:/Cadence/tools/bin:$ACV_ROOT/bin
-If you do not use bash (csh for example), you will need to use following syntax:
setenv ACV_ROOT /Cadence/Aptivia/tools/acv
setenv LANG C
set path = ($path /usr/local/netscape /Cadence /Cadence/tools /Cadence/tools/dfII /Cadence/tools/dfII/bin /Cadence/tools/bin $ACV_ROOT/bin)
-The variables for other shells can also be found in the following directory: /home/thedock/CadenceInstall/InstallCadence_extrafiles/envvariables)
-Reboot you computer
-Open a Console (Konsole for exemple)
-To start Cadence, type:
> icfb &
-And now, Cadence will start!
-To start the documentation, type:
> cdsdoc &
6. Compilation of a new Mandrake Kernel
---------------------------------------
-Open a Console (Konsole)
-Make sure you are also logged in as root:
> su -
Password:> (enter the root password here)
-Goto the following directory /usr/src/linux
> cd /usr/src/linux
-Clean the old sources
> make mrproper
-Start the graphical kernel configuration interface
> make xconfig
-Configure the wanted options and click on "Save changes and exit"
-Compile the kernel by typing the following command in the console:
> make dep clean bzImage modules modules_install install
7. Installation of Matlab 6.5
-----------------------------
Start a console (Konsole under KDE)
-Logging as root:
> su -
Password:> (enter the root password here)
-Go into the following directory: /home/thedock/CadenceInstall/Matlab_6.5/
> cd /home/thedock/CadenceInstall/Matlab_6.5/
-Make the directory in which you will install Matlab 6.5: /usr/local/matlab6p5/
> mkdir /usr/local/matlab6p5/
-Copy the license file to that directory:
> cp license.dat /usr/local/matlab6p5
Note: The SERVER and DAEMON lines in the license.dat file have been removed since they will be generated automaticaly by the installer.
-Unpack the installation script:
> tar xvf boot.ftp
-Run the install file as root to start the installer:
> ./install
-A window will pop-up: "MATLAB Installation":
Click on the OK button to start the installation.
-Another window will pop-up: "License Agreement":
Click on the "Yes" button to continue.
-MATLAB root directory location: this means Matlab installation directory: enter the following location:
/usr/local/matlab6p5
Click the "OK" button to validate.
-The "License File" dialog box will open:
Simply click on the "OK" button to continue.
-The "Installation Options" dialog box will open:
Choose Platform Linux, and add all items to the "Item to install:" column if not so. Normaly, it should be preselected.
-The "Installation Data" dialog box will open:
Check the "Create symbolic links to MATLAB and mex scripts".
The "Specify directory to put links in" should be /usr/local/bin
The MATLAB License No. should be 52516.
And click the "OK" button to install MATLAB.
-The "Begin Installation" dialog box will open:
Click on the "OK" button to really begin the installation.
-The "Installation Complete" dialog box will open:
Click on the "Exit" button to finish the installation. Now you need to set up the license server.
-Loggout the root user (license manager will not start if you try to start it as root):
> exit
-If you choose to run FleXlm manually:
> /usr/local/matlab6p5/etc/lmstart
-To start Matlab, type:
> matlab &
-And now, Matlab will start!
http://lea-linux.org/admin/shell.php3
|
 讓我們程式搜尋結果更加完美 如果您覺得該文件有幫助到您，煩請按下我如果您覺得該文件是一個一無是處的文件，也煩請按下我 |
|
該文件您看起來是亂碼嗎？您可以切換編碼方式試試看！ISO-8859-1 | latin1 | euc-kr | euc-jp | CP936 | CP950 | UTF-8 | GB2312 | BIG5 |
|