Burning CDG (bin files) To Disk Using A None Compatible Burner
Taken from www.karaokeplayground.co.com
Get the toolz from here - http://www.daemon-tools.org/
Your burner must support RAW96, DAO for it to work! Most burners produced during the last few years will work.
First, get Daemon Toolz (version 3.0.10 or higher) available from http://www.daemon-tools.org/ and install. Turn off AIN (Win 9x) or set the properties to Prompt (WinXP) for the virtual drive (Stealth DVD) it creates. This will prevent your media player from starting up when the virtual drive is mounted. Restart your computer.
Second, we need to create a cue sheet to load into the virtual drive. Open CDRwin, and select Record Disk. If your burner is not supported by CDRwin, use the cue sheet provided by MP3+G Toolz, or use Cdrcue Cue Sheet Editor (www.dcsoft.com)
Select Load Tracks
In the new browser, select CD+G, then Add
In the next window, direct the browser to where you have your .bin files stored. Highlight the tracks you want to add to your new disk, then press Open.
In the following window, arrange the tracks in the order you would like them to appear on the CD you are creating. Select Save As.
Pick a name for your Cue file, and save it to your hard drive. REMEMBER where you have saved it!!!!! When finished, you will come back to the screen shown above. Press OK, and CDRwin will create your Cue sheet. You can now completely close CDRwin.
Start Daemon Toolz. Left click on the icon in your tray, and then
click on Device 0: No Media. Direct the next window to where you have stored your Cue sheet. Double click on your Cue sheet to load the virtual DVDrom. If your Media Player or other CD Player starts up, end that program. You can actually play your new disk with WinCDG using your V386 DVD as a source device by itself, or rip the tracks off of your virtual drive with CDRwin! As well, you can create an image (whole CD+G disk) with CloneCD, load the created .ccd file into Daemon Toolz, and extract individual tracks (.bin files) directly from your virtual drive!
Now, to burn your disk
Open CloneCD, and select Copy Disk
Next, select your CD Reader Drive. This will be the V386 Stealth DVD. Press Next.
Almost done!
In the next window, we need to create a profile for CD+G disks. You only have to do this once.
Right click inside the window and select New. Call your new profile CD+G. Right click on the profile and select edit. Click on the audio read settings tab. Check on Read Subchannel Data from Audio Tracks, and Read Only First Session. Select Best (Slowest) extraction quality to help prevent pitting.
Put a blank CDR into your burner. Select your write speed. You should be able to do it at max, but if the graphics are pitting, lower the write speed value (4x or lower). Double click on the CD+G profile. Your disk will now be written.
Your disk will be ejected from the recorder when the write is finished. Test the disk in a CD+G karaoke player, check for pitting of the graphics and poor audio. Adjust your read and write speeds as necessary. You may need to try a different brand of disk if your machines cannot read it properly.
Ta daaaaaaaaa! You now have a working backup of individual tracks!
We would like to thank Andrew from Daemon Toolz for updating the software to enable CD+G format.
A big PAT ON THE BACK for Traxmaster, who has spent a lot of time and effort on this project. YOURE THE MAN!!!!!!!!!!! Enjoy your beer!
Help file created by Holler, a member of our message board Karaoke Gossip
|
 讓我們程式搜尋結果更加完美 如果您覺得該文件有幫助到您，煩請按下我如果您覺得該文件是一個一無是處的文件，也煩請按下我 |
|
該文件您看起來是亂碼嗎？您可以切換編碼方式試試看！ISO-8859-1 | latin1 | euc-kr | euc-jp | CP936 | CP950 | UTF-8 | GB2312 | BIG5 |
|