After downloading pmp rita.iso file from edonkey you have to do following simple steps.
1) Download Virtual CD-ROM Control Panel v2.0.1.1 small software from following link.
http://www.softpedia.com/get/CD-DVD-Tools/CD-DVD-Images-Utils/Virtual-CDROM-Control-Panel.shtml
OR
http://addict3d.org/index.php?page=downloadfile&ID=3330
2) How to use Virtual CD-ROM Control Panel v2.0.1.1 is give with software .
3) Now mount the pmp rita.iso with the software as given in Virtual CD-ROM Control Panel v2.0.1.1 .
4) By dowing all above staps you created a virtual drive in your computer.
5) Now open the created drive and double click on setup.exe by this pmp fastrack is install to your computer .
6) click icon created on your computers desktop pm fastrack and enjoy.
Note Every time you restart your computer u have to mount image again and again.
Enjoy your studies
It only works with ISO images
Installation instructions
=========================
1. Copy VCdRom.sys to your %systemroot%system32drivers folder.
2. Execute VCdControlTool.exe
3. Click "Driver control"
4. If the "Install Driver" button is available, click it. Navigate to the %systemroot%system32drivers folder, select VCdRom.sys, and click Open.
5. Click "Start"
6. Click OK
7. Click "Add Drive" to add a drive to the drive list. Ensure that the drive added is not a local drive. If it is, continue to click "Add Drive" until an unused drive letter is available.
8. Select an unused drive letter from the drive list and click "Mount".
9. Navigate to the image file, select it, and click "OK". UNC naming conventions should not be used, however mapped network drives should be OK.
You may now use the drive letter as if it were a local CD-ROM device. When you are finished you may unmount, stop, and remove the driver from memory using the driver control.
Monu from India.
|
 讓我們程式搜尋結果更加完美 如果您覺得該文件有幫助到您，煩請按下我如果您覺得該文件是一個一無是處的文件，也煩請按下我 |
|
該文件您看起來是亂碼嗎？您可以切換編碼方式試試看！ISO-8859-1 | latin1 | euc-kr | euc-jp | CP936 | CP950 | UTF-8 | GB2312 | BIG5 |
|